Care of the interior

Swissvax Fabric is a textile cleaner concentrate that is mixed with carbonated mineral water in the appropriately scaled Swissvax Mixing Bottle and allows thorough, effortless and gentle cleaning of textiles such as fabric upholstery, vehicle carpets, roof linings or textile tops by spraying on the ready-to-use mixture. A significant advantage over foam-based textile cleaning products is the improved fine dosage, which means that so-called ‘cleaning rings’ on the surface to be cleaned can be avoided. In combination with the Swissvax Mixing Bottle, Swissvax Fabric is an unbeatable aid for refreshing and cleaning textiles of all kinds.

Application of FABRIC textile cleaner

1. Fill the Swissvax Mixing Bottle with carbonated mineral water up to the ‘1:2’ mark.
2. Add Swissvax Fabric Concentrate up to the ‘1:3’ mark.
3. Gently swirl the mixing bottle.
4. Spray Swissvax Fabric mixture evenly over the surfaces to be treated and leave to work for 1-2 minutes.
5. Rub the surface lightly with a soft brush or a soft, clean Swissvax cloth and leave to dry.
6. Thoroughly vacuum the dry surface with a hoover.
7. It is essential to re-impregnate cleaned surfaces.

Alcantara

Seats and interior panelling covered with Alcantara (artificial suede) are hard-wearing. However, care must be taken when cleaning Alcantara. The use of conventional cleaners is usually problematic as they can contain solvents that weaken the Alcantara synthetic fibres. Alcanta Cleaner contains biodegradable ingredients and has been specially developed for the regular cleaning of artificial suede.

Application ALCANTA CLEANER

1. Spray Alcanta Cleaner onto a clean sponge or directly onto the surface. Dab the entire surface with medium pressure.
2. Spray Alcanta Cleaner onto heavily soiled surfaces and work in with a Swissvax cleaning brush in a circular motion without applying pressure.
3. Dab dry with a soft cotton cloth. Do not rub!

Well-kept interior in minutes

Swissvax Quick Interior Finish removes dust, grease and dirt from plastics, painted surfaces, leather and metal surfaces in a matter of seconds and leaves a well-groomed finish.

Application QUICK INTERIOR FINSIH

1. Remove loose dirt from the interior using a hoover with a narrow nozzle.
2. Shake the bottle well.
3. Spray Swissvax Quick Interior Finish onto a clean Swissvax Micro-Wash microfibre cloth (yellow) and spread evenly.
4. Turn the microfibre cloth over and rub with the dry side.

How to care for precious wood

Precious wood interior applications require special care. These precious woods are usually protected by several thin coats of clear varnish. This is where Swissvax Wood Polish comes in, which has long been an insider tip among Concours participants. This incredible wax for glossy and matt lacquered woods is based on pure yellow Brazilian Grade One Carnauba wax and produces an unrivalled shine with long-lasting care and protection.

Application WOOD POLISH

1. Apply Swissvax Cleaner Fluid Regular to the wood surfaces with a Swissvax cotton applicator (white).
2. Work into the wood surfaces with an even up and down motion.
3. Polish off with a clean Swissvax cloth.
4. Warm Swissvax Wood Polish with a light circular motion of the finger and apply sparingly with the fingertip without applying pressure. Leave on for 5 minutes.
5. Polish to a shine with a clean Swissvax Micro-Polish microfibre cloth (blue).

Plastic cleaning and care

It's like skin care: first comes the deep clean and then the care. Only deep pore cleaning creates the basis for a flawless finish. Use Swissvax Plastic Wash for flawless deep cleaning - and Swissvax Protecton or Protecton Matt for subsequent deep care.

You will achieve the best results if Swissvax Protecton or Protecton Matt is applied with a Swissvax sponge applicator (black). Use a Swissvax detail brush to work on hard-to-reach areas (e.g. air vents).

Swissvax Nano Express, which can be used on all materials, is also ideal for quick plastic cleaning and care in exterior areas.

Application PLASTIC WASH

1. Wipe the plastic or vinyl surfaces to be cleaned with a damp Swissvax Micro-Wash microfibre cloth (yellow).
2. Spray Swissvax Plastic Wash onto a clean Swissvax Micro-Wash microfibre cloth (yellow) or directly onto the plastic surface and spread evenly over the entire surface.
3. Work in with medium pressure. Spray on more Swissvax Plastic Wash depending on the degree of soiling and change the cloth. Use a Swissvax cleaning brush to clean textured surfaces.
4. Rub with a slightly damp Swissvax cloth.

Application PROTECTON

1. Remove dirt from upholstery or plastic fittings. Dirty plastics are best cleaned with Swissvax Plastic Wash. Dishwashing liquid often works wonders on steering wheels and gear sticks, as it is extremely degreasing.
2. Then apply Swissvax Protecton with a Swissvax sponge applicator (black).
3. Leave to act. The milky-white film changes to a deep black appearance.

Application PROTECTON MATT

1. Clean plastic or vinyl surfaces and allow to dry.
2. Shake bottle well.
3. Apply Swissvax Protecton Matt evenly with a Swissvax sponge applicator (black) and apply firm pressure.
4. The matt finish becomes visible after approx. 20 minutes